English - 0
adjusting the Volume
using the Volume buttons
1.
Press the
Vol
or
Vol
button to decrease or increase the volume.
using the mutE button
At any time, you can cut off the sound using the
mutE
button.
1.
Press
mutE
button and the sound cuts off.
The "
" is displayed on the screen.
2.
To turn mute off, press the
mutE
button again or simply press the
Vol
or
Vol
button.
1.
Press the
PrE-Ch
button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one
channel, then use the number button to select the second channel. Then
use the
PrE-Ch
button to quickly alternate between them.
using the PrE-Ch button to select the Previous Channel
Viewing the Display
1.
Press the
Info
button on the remote control.
Press the
Info
button once more or wait approximately 10 seconds and
the
display disappears automatically.
The display identifies the current channel and the status of certain audio-video settings.
Viewing the menus
1.
With the power on, press the
mEnu
button.
The main menu appears on the screen. The menu’s left side has icons:
Picture, Sound, Channel, Setup, Input, Application.
2.
Use the ▲ or ▼ button to select one of the icons.
Then press the
EntEr/oK
button to access the icon’s sub-menu.
3.
Press the
ExIt
button to exit.
The on-screen menus disappear from the screen after about one minute.
mode
: Dynamic
Backlight
: 10
Contrast
: 100
Brightness
: 45
Sharpness
: 75
Colour
: 55
Tint (G/R)
: G50/R50
Detailed Settings
Picture
DTV Air
05.
thu 6 Jan 0:0 am
now_Event(/), Ver(/6) : It sho...
now_Event(/), Ver(/6) : Extended Event text...It should be less then bytes
and 80 standard size characters, the total number of aPr codes used in the
♥
tV GlobohD
10:00 am - 11:00 am
080i multi
BN68-01180F-ENG.indd 10
2008-06-09 �� 2:34:25
