Samsung HT-AS700 Instruction Manual Download Page 51

Page: 51 / 55

Symptom

Check Remedy

There is no sound from rear

center speaker

•

Is the rear center speaker connected

properly?

•

Is the SB SPK (Rear Center) selected

to NONE in Speaker Setup?

•

Is Surround Mode selected to EX/ES

•

Refer to page 9~10 to connect it properly.

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Refer to page 35~36 to select Surround

Mode to EX/ES.

Can't select EX/ES Mode.

•

Is SB SPK (Rear Center) selected to

NONE in Speaker Setup?

•

Is the input signal selected properly?

•

Refer to page 17~18 to select LARGE or

SMALL.

•

Use 5.1 channel external component.

Can't select Dolby Pro Logic

llx Mode.

•

Is the input signal selected properly?

•

Select 2 channel Dolby Digital, PCM, and

Analog input signal.

There is no sound when
playing DTS encoded DVD
and CD.

•

Is analog input selected?

•

Check whether digital external component

is properly connected and refer to page 19
to select the digital input.

Can't select NEO:6 Mode.

•

Is the input signal selected properly?

•

Use PCM and Analog input signal.

Product Protection Function

DC Protection Circuit

• If DC is output from output connector, DC protection circuit

works automatically to protect the speaker.

Heat Protection

• Protection function works if the main unit is overheated or power

transformer is overheated.
appears in the display when the “

” function

works.
- If speaker terminal is shorted
- If speaker cord is shorted
If there is no problem when you turn it on again after turning it
off, PROTECTION mark will disappear on the display and the
unit will work properly.

•

If PROTECTION appears on the display,
check whether speaker terminal is shorted
and then turn on the device.

√√

œœ

MISCELLANENOUS

Summary of Contents for HT-AS700
























































Search results

Summary of Contents for HT-AS700

Reviews:

Related manuals for HT-AS700

Brands by name

Popular brands

Samsung HT-AS700, Instruction Manual

Search results

Summary of Contents for HT-AS700

Reviews:

Related manuals for HT-AS700

Brands by name

Popular brands