23
Test Tone
Use test tone to check speaker connection status or defect of speaker or adjust the level.
Press and hold
SURROUND
button for about 5 seconds.
•
“SETUP MODE” appears on the display and enters into Setup Mode.
Press
INPUT
button 4 times.
•
“TEST-T AUTO” appears in the display.
Press
SURROUND
button.
•
Test signal will be automatically output as follows; F.L
➝
CEN
➝
F.R
➝
S.R
➝
S.B
➝
S.L
➝
S.W .
•
During test signal output, press
SELECT
( ) button to adjust the speaker output
level from -10 to +10 dB by 1 step.
√
To Automatically Output Test Tone
MAIN UNIT
1
2
3
To Stop Test Tone
Method 1) Press
INPUT
button 2 times.
•
“TEST-T OFF” appears on the display and test tone stops.
Method 2) Turn
VOLUME CONTROL.
•
“SETUP MODE OFF” appears on the display and test tone stops.
,