background image

14

1. Connect the FM antenna supplied to the FM

75

COAXIAL terminal as a temporary mea-sure.

2. Slowly move the antenna wire around until you find

a location where reception is good, then fasten it to
a wall or other rigid surface.

1. Connect the AM loop antenna supplied to the AM      

and terminals.

2. If reception is poor, connect an outdoor single vinyl-

covered wire to the AM ter-minal. (Keep the AM loop
antenna con-nected).

The cooling fan dissipates the heat generated inside the unit so that the unit can
be operated normally. The cooling fan is activated automatically to supply cool air
to the unit.

Please observe the following cautions for your safety.

Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the
unit could rise and may damage it.

Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are
covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

Connecting the FM and AM
Antennas

FM antenna connection

If AM reception is poor, connect an
outdoor AM antenna(not supplied).

FM Antenna (supplied)

AM Loop Antenna
(supplied)

Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.

COOLING FAN

AM antenna connection

CONNECTIONS

Summary of Contents for HT-AS700
























































Reviews: