Samsung HL-S5686C Owner'S Instructions Manual Download

Page: 98 / 107

English-98

Possible Solution

This message appears when the connection speed of the

connected device and the device selected from the Target

List are different when copying data.

➔

Connect a low speed device between the two devices.

(See figure)

* A 1394 device has a maximum connection speed which will

be marked near the IEEE 1394 connector with an “S” number

(i.e., S100,S200,S400). The higher the number, the faster the

maximum connection speed.

This TV has a maximum connection speed of S400.

This message appears when you try to record a device, which

is currently being recorded manually or by another device,

through the TV.

➔

Stop the recording device and retry.

Check that the connected device supports DTCP.

This message appears when trying to copy protected content.

This message appears when trying to copy No-more-copies or

Copy-never content.

Although a camcorder which supports the DV format appears

in the device list, you cannot watch video from the camcorder

even if you select the camcorder as an input source,

because the TV supports the MPEG format only.

Problem

“Connection is failed.

1394 network speed is not compatible.”

message appears.

“This device is occupied by another

device.” message appears.

“Authentication is failed” message

appears.

“Recording is prohibited.” message

appears.

Although DV Camcorder is in the

device list, no picture is displayed

on the screen when the DV camcorder

is selected.

D-Net DTV

S400

D-Net DTV

S400

D-Net DTV

S400

IEEE1394

cable

IEEE1394

cable

IEEE1394

cable

IEEE1394

cable

IEEE1394

cable

IEEE1394

cable

IEEE1394

cable

S400

GROUP
DEVICE

S200

GROUP
DEVICE

S100

GROUP
DEVICE

S200

DEVICE

S200

DEVICE

S400

DEVICE

S400

DEVICE

BP68-00620A-00Eng 9/14/06 5:28 PM Page 98

Summary of Contents for HL-S5686C












































































































Search results

Summary of Contents for HL-S5686C

Reviews:

Related manuals for HL-S5686C

Brands by name

Popular brands

Samsung HL-S5686C, Owner'S Instructions Manual

Search results

Summary of Contents for HL-S5686C

Reviews:

Related manuals for HL-S5686C

Brands by name

Popular brands