Settings
Channel
ENG
[DiSEqC motor] [User settings]
In the
[User settings]
menu when
[DiSEqC
motor]
option is chosen, you are able to:
•
drive west
•
drive east
•
store position
•
move to stored position
For drive west/east two options are possible
•
[Continuous]
: If you press the button, the
motor drives until the button
is released.
•
[Step]
: If you press the button, the motor
drives by several degrees only.
Each satellite has its own slot number. So after
correct dish adjustment, you must store it as
the current position. This stored position will
be used for the dish moving during scanning or
channel change.
[USALS] [User settings]
In the
[User settings]
menu when
[USALS]
option is chosen, you are able to:
•
set longitude
•
set latitude
•
move to set position
•
move to position 0
Each satellite has its own slot number. So after
correct dish adjustment, you must store it as
the current position. This stored position will
be used for the dish moving during scanning or
channel change
1.
If the
[Installation type]
option is set to
[SatCR]
, additional
[Single Cable settings]
option will appear in
[Channel]
menu.
31
Summary of Contents for GX-SM530SL
Page 60: ...Memo ...
