6
ENGLISH
PRECAUTION TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY.
Failure to observe the following safety precautions may result in harmful
exposure to microwave energy.
(a)
Under no circumstances should any attempt be made to
operate the oven with the door open or to tamper with the safety
interlocks (door latches) or to insert anything into the safety
interlock holes.
(b)
Do NOT place any object between the oven door and front
face or allow food or cleaner residues to accumulate on sealing
surfaces. Ensure that the door and door sealing surfaces are
kept clean by wiping after use first with a damp cloth and then
with a soft dry cloth.
(c) Do NOT operate the oven if it is damaged until it has been
repaired by a qualified microwave service technician trained by the
manufacturer. It is particularly important that the oven door closes
properly and that there is no damage to the:
(1) Door (bent)
(2) Door hinges (broken or loose)
(3) door seals and sealing surfaces
(d) The oven should not be adjusted or repaired by anyone other than
a properly qualified microwave service technician trained by the
manufacturer.
This product is a Group 2 Class B ISM equipment. The definition of group
2 which contains all ISM equipment in which radio-frequency energy is
intentionally generated and/or used in the form of electromagnetic radiation
for the treatment of material, and EDM and arc welding equipment.
For Class B equipment is equipment suitable for use in domestic
establishments and in establishments directly connected to a low voltage
power supply network which supplies buildings used for domestic
purposes.
IMPORTANT SAFETY INSTRUCTIONS
Make sure that these safety precautions are obeyed at all times.
WARNING
Only qualified staff should be allowed to modify or
repair the microwave oven.
Do not heat liquids and other food in sealed
containers.
For your safety, do not use high-pressure water
cleaners or steam jet cleaners.
Do not install this appliance; near heater,
inflammable material; in a humid, oily or dusty
location, in a location exposed to direct sunlight
and water or where gas may leak; on un level
ground.
This appliance must be properly grounded in
accordance with local and national codes.
Remove all foreign substances such as dust or
water from the power plug terminals and contact
points using a dry cloth on a regular basis.
Do not pull or excessively bend or place heavy
objecton the power cord.
In the event of a gas leak (such as propane
gas, LP gas, etc.), ventilate immediately without
touching the power plug.
Do not touch the power plug with wet hands.
Do not turn the appliance off by unplugging the
power plug while an operation is in progress.
Do not insert fingers or foreign substances, If any
foreign substance such as water has entered the
appliance, unplug the power plug and contact
your nearest service centre.
GW731KD_XTL-03896C_EN.indd 6
2011-02-17 12:03:59
