Samsung ER 5200 Operator'S And Programming Manual Download

Page: 27 / 183

ER 5200/5240 Electronic Cash Register

Operations • 25

Coded Sign-On

If the code entry sign-on method is selected, press the clerk key, enter the clerk code, and then press the
clerk key again.

To sign the clerk off, enter 0 (Zero) and press the clerk key.

Receipt On and Off

The RECEIPT ON/OFF function key may or may not be located on your keyboard. (The RECEIPT
ON/OFF key is located on the default keyboard.)

If The RECEIPT ON/OFF Key Is Located On The Keyboard

1. Press

the

RECEIPT ON/OFF key once to turn the receipt off.

2. Press

the

RECEIPT ON/OFF key again to turn the receipt on.

If The RECEIPT ON/OFF Key Is Not Located On The Keyboard

1. Turn the control lock to the X position.

2. To turn the receipt off, enter 9 9, press the SBTL key. Enter 1, press CASH.

3. To turn the receipt on, enter 9 9, press the SBTL key. Enter 0, press CASH.

CLERK

SBTL

CASH

SBTL

CASH

CLERK

Clerk Code (up to 6 digits)

Summary of Contents for ER 5200
























































































































































































Search results

Summary of Contents for ER 5200

Reviews:

Related manuals for ER 5200

Brands by name

Popular brands

Samsung ER 5200, Operator'S And Programming Manual

Search results

Summary of Contents for ER 5200

Reviews:

Related manuals for ER 5200

Brands by name

Popular brands