Samsung ER-4915, Programming Manual

Page: 8 / 36

ER-4915 Dealer Pocket Programming Guide
ER-4915 Dealer Pocket Programming Guide
8 29
Tax Programming, continued
Programming Procedure
n
Enter the option code for N6 & N7 from the table on page 6. It is not
necessary to enter leading zeros for N1 - N5.
n
Enter the maximum non-taxable amount. Depress the TAX SHIFT
key associated with the rate you wish to program.
n
Enter the first tax amount charged (1). Depress the TAX SHIFT key
associated with the rate you wish to program.
n
Enter the high side of the dollar range for the first non-repeat break
which charges tax (21). Depress the DECIMAL key.
n
Repeat Step 3 for each non-repeat break (38), (56), (73)
n
Enter the final non-repeat break (91), and depress the X/TIME key.
n
Enter the high side of the dollar range for the first repeat break in the
repeat breaks pattern (108). Depress the DECIMAL key.
n
Enter the high side of the dollar range for the next repeat break in the
repeat break pattern and for each following repeat break in the repeat
break pattern (124), (141). Depress the DECIMAL key.
n
Depress the CASH TEND key to finalize Tax Table Programming.
System Options Programming Key Sequence
Enter the address number, drepress
the X/TIME key. Enter the status
number, or the
sum of the options,
and depress the SUBTOTAL key.
X / TIME SUBTOTAL
ADDRESS
NUMBER
STATUS
OR SUM
ADDRESS SYSTEM OPTION VALUE = SUM
29
% calculations will:
NOTE: % calculations include %+, %-,
and % tax calculations.
round up at .50 = 0
always round up = 1
always round down = 2
30
Rounding factor for split pricing and
decimal multiplication.
round up at .50 = 0
always round up = 1
always round down = 2
31 System uses:
Tax 3 / GST = 1
Food Stamps = 0
32 Allow Post Tender Function.
YES = 1
NO = 0
33
Enforce Non-add # key entry at beginning
of sale.
YES = 1
NO = 0
34
Number of digits required for Non-add #
entry.
(0 allows any length, 1-7 digits)
0 - 7
35
Disable Department/PLU preset/HALO
override.
YES = 1
NO = 0
36
Activate Preset Tender Feature:
FOOD STAMP becomes $5.00
CHARGE 1 becomes $10.00
CHARGE 2 becomes $20.00
YES = 1
NO = 0
37 Header message on receipt is:
Stamp Only = 0
Stamp & Prog. Logo = 1
Programmable Only = 2
38 Activate Validation Sensor
YES = 1
NO = 0
39
Allow Eight-digit DEPT. & PLU amount
entries.
NOTE: Maximum 8 digit amount is
500,000.00. 7 digit max is 99,999.99.
YES = 1
NO = 0
40
Allow dicimal entry of Food Stamp
Tendered?
YES = 1
NO = 0
41 Final Validation is:
Total of Sale = 1
Last Tender = 0
42
Department Shift key is active
(15 department configuration only.)
YES = 1
NO = 0