Samsung ER-4915, Programming Manual

Page: 24 / 36

ER-4915 Dealer Pocket Programming Guide
ER-4915 Dealer Pocket Programming Guide
PLU Programming
Programming Options
Carry the desired value for addresses with single options directly to the “SUM” column. For
addresses with multiple choices, enter values of individual options in “=” column, add, and
enter the combined value in the “SUM” column.
NOTE: Negative hash PLUs and negative gallonge PLUs are not
allowed. Also, compulsory validation is not allowed on
single item PLUs.
24
13
ADDRESS PLU STATUS VALUE = SUM
N1
Hash PLU feature activated
YES = 1
(A)
NO = 0
Gallonage PLU feature activated
YES = 2
(B)
NO = 0
Enforce Compulsory Non-add # Entry
YES = 4
(C) (A+B+C)
NO = 0
N2
PLU is NEGATIVE
YES = 1
(A)
NO = 0
SINGLE ITEM
YES = 2
(B)
NO = 0
Validation Compulsory
YES = 4
(C) (A+B+C)
NO = 0
N3
PLU is:
PLUs may not be programmed to be
both open and preset.
OPEN PLU = 0
PRESET PLU = 1
DISABLED = 2
N4
PLU is TAXABLE AT RATE 1
YES = 1
(A)
NO = 0
TAXABLE AT RATE 2
YES = 2
(B)
NO = 0
TAXABLE AT RATE 3 OR FOOD
STAMP ELIGIBLE
* System programming option 31
specifies the use of either Tax rate 3
(Canadian GST) or Food Stamp
function.
YES = 4
(C) (A+B+C)
NO = 0
Clerk Secret Code Programming
Before attempting this programming procedure, all clerks must first
be signed off in REG. mode.
Also, in order to activate sign-on codes for clerks, system option pro-
gramming for address #26 must be set to 2.
Programming Key Sequence
Enter the code for the CLERK key to be programmed. Enter 901 for
clerk 1, 902 for clerk 2, 903 for clerk 3 and 904 for clerk 4, and press
SUBTOTAL. Enter a clerk code number 1-6 digits long. Press CASH
TEND key to finalize secret clerk key programming.
CASH TEND
EXIT CLERK CODE NUMBER
(UP TO 6 DIGITS)
9 0 X
SUBTOTAL
X = 1-4
Clerk Drawer Assignment
Enter the code for the CLERK key to be programmed, 911 for clerk 1,
912 for clerk 2, 913 for clerk 3 and 914 for clerk 4, and press SUBTO-
TAL. Then enter 1 for drawer 1, or 2 for drawer 2, followed by the CASH
TEND key to finalize drawer assignment.
CASH TEND
EXIT
1 = DRAWER 1
2 = DRAWER 2
9 1 X SUBTOTAL
X = 1-4
NOTE: Default drawer assignment for all clerks is drawer 1.