Samsung ER-4915, Programming Manual

Page: 21 / 36

ER-4915 Dealer Pocket Programming Guide
ER-4915 Dealer Pocket Programming Guide
21 16
PLU Programming, continued
Programming Linked PLUs
The following procedure is used to link two or more PLUs. Once linked,
the second PLU will follow automatically when the first is registered.
In P-Mode:
Removing or Deleting a PLU
In order to “de-activate” a PLU, or remove its status and department link
thereby removing it from reports:
CASH TEND
EXIT
VOID PLU
PLU NO.
SUBTOTAL
0 0 2
DELETE ANOTHER?
In Program mode, enter 200 SUBTOTAL, the PLU number, press the
PLU key, followed by the VOID key. Press the CASH TEND key to
finalize programming.
<
<
CHARGE Key 1 - 2 Programming
Programming Options
Carry the desired value for addresses with single options directly to the “SUM” column. For
addresses with multiple choices, enter values of individual options in “=” column, add, and
enter the combined value in the “SUM” column.
CHARGE Key Programming Key Sequence
First Programming Step
Enter the program address for a CHARGE key, 601 for charge 1, 602 for
charge 2 and press SUBTOTAL. Enter the desired status, from the table
above, and press the CASH TEND key.
ADDRESS CHARGE OPTIONS VALUE = SUM
N1
Sale is Exempt from Tax 1
YES = 1
(A)
NO = 0
Sale is Exempt from Tax 2
YES = 2
(B)
NO = 0
Sale is Exempt from Tax 3
YES = 4
(C) (A+B+C)
NO = 0
N2
Non-add number entry is compulsory
on charge tender.
YES = 1
NO = 0
Second Programming Step
Key in the program address for programming the charge key tender
limit, 611 for charge 1, 612 for charge 2 and pressing the SUBTOTAL
key. Enter up to a six digit amount HALO (0-9999.99, 0 for no HALO)
for maximum amount allowed on a charge sale and press the CASH
TEND key.
CASH TEND
EXIT HALO (0-9999.99)
SUBTOTAL 6 1 X
X = 1-2
LINK ANOTHER?
PLU
< <
X X X
SUBTOTAL
0 0 2 X X X
# / NO SALE CASH TEND
EXIT
CASH TEND
EXIT N1 N2
SUBTOTAL 6 0 X
X = 1-2