Samsung DW60A8040 Series Repair Manual Download

Page: 37 / 50

Disassembly and Reassembly _ 37

2-15. BASKET MIDDLE / GUIDE TINE / HANDLE BASKET

- WIRE FOLDING : DD81-03173A / SVC WIRE FOLDING

- HOLDER TINE-UP : DD81-03186A / SVC HOLDER TINE-UP

- GUIDE BUTTON : DD81-03174A / SVC GUIDE BUTTON

- HOLDER GUIDE TINE : DD81-03175A / SVC HOLDER GUIDE TINE

- HOLDER GUIDE TINE-UP : DD81-03177A / SVC HOLDER GUIDE TINE-UP

- WIRE GUIDE TINE : DD81-03176A / SVC WIRE GUIDE TINE

Part

Figure

Description

BASKET MIDDLE/

HANDLE

BASKET/

WIRE FOLDING/

HOLDER TINE-

UP/

HOLDER GUIDE

TINE/ GUIDE

BUTTON /

HOLDER GUIDE

TINE-UP

HANDLE BASKET

[DISASSEMBLY]

1. Remove the HANDLE BASKET by lifting the 2 RIB.

WARNING

Do not this work without safety gloves. It can

cause injury from sharp edge.

CAUTION

Be careful not to be broken the hooks.

WIRE FOLDING

HOLDER TINE-UP

2. Release the 2 HOLDER TINE-UP hooks and

separate the WIRE FOLDING from the BASKET

MIDDLE.

WARNING

Do not this work without safety gloves. It can

cause injury from sharp edge.

CAUTION

Be careful not to be broken the hooks.

Summary of Contents for DW60A8040 Series



















































Search results

Summary of Contents for DW60A8040 Series

Reviews:

Related manuals for DW60A8040 Series

Brands by name

Popular brands

Samsung DW60A8040 Series, Repair Manual

Search results

Summary of Contents for DW60A8040 Series

Reviews:

Related manuals for DW60A8040 Series

Brands by name

Popular brands