Samsung DW60A8040 Series Repair Manual Download

Page: 38 / 50

38 _ Disassembly and Reassembly

Part

Figure

Description

BASKET MIDDLE/

HANDLE

BASKET/

WIRE FOLDING/

HOLDER TINE-

UP/

HOLDER GUIDE

TINE/ GUIDE

BUTTON /

HOLDER GUIDE

TINE-UP

GUIDE BUTTON

HOLDER GUIDE TINE

3. Release the 4 hooks of HOLDER GUIDE TINE and

separate it from the BASKET MIDDLE.

4. Push the GUIDE BUTTON to separate it from the

HOLDER GUIDE TINE.

WARNING

Do not this work without safety gloves. It can

cause injury from sharp edge.

CAUTION

Be careful not to be broken the hooks.

HOLDER GUIDE TINE-UP

WIRE GUIDE TINE

5. Release the hook of HOLDER GUIDE TINE-UP

to separate WIRE GUIDE TINE from BASKET

MIDDLE.

WARNING

Do not this work without safety gloves. It can

cause injury from sharp edge.

CAUTION

Be careful not to be broken the hooks.

[ASSEMBLY]

Reassembly is the reverse order of disassembly.

Carefully assemble the assembly position of

HOLDER TINE-UP and HOLDER GUIDE TINE-UP.

Summary of Contents for DW60A8040 Series



















































Search results

Summary of Contents for DW60A8040 Series

Reviews:

Related manuals for DW60A8040 Series

Brands by name

Popular brands

Samsung DW60A8040 Series, Repair Manual

Search results

Summary of Contents for DW60A8040 Series

Reviews:

Related manuals for DW60A8040 Series

Brands by name

Popular brands