22 _ Disassembly and Reassembly
Part
Figure
Description
DOOR HINGE/
GUIDE HINGE
(DW60A80**BB/
DW60A80**F*/
DW60A80**U*
models)
[ASSEMBLY]
1. Assemble the DOOR HINGE assembly and
BRACKET DOOR FRAME with machine screws.
- Screws for DOOR HINGE assembly:
DD81-02764A / 4 pcs
- Screws for BRACKET DOOR FRAME:
DD81-02728A / 2 pcs
WARNING
Do not this work without safety gloves. It can
cause injury from sharp edge.
About 15˚
2. Fit the DOOR INNER assembly into the holder of
TUB to lock the hook of DOOR HINGE.
WARNING
Do not this work without safety gloves. It can
cause injury from sharp edge.
3. Fit the HOLDER ROPE DOOR on the both side of
DOOR HINGE with the DOOR closed.
4. Connect 2 terminals of DETERGENT DISPENSER,
and 1 ground wire.
CAUTION
Make sure the Wire harness are not getting stuck
in other parts.
