C
onnecting & Setting Up
English - 16
Connecting the SCART Cable
Connecting DVD Recorder & VCR
to the TV using the RF Cable
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
■
To obtain better quality pictures and sound on
your television, you can also connect your DVD
Recorder & VCR to the television via the SCART
cable if your television equipped with type of
connection.
■
1
. Remove the aerial or network input cable from the
television.
2
. Connect this cable to the 75
Ω
aerial jack marked
on the rear of your DVD Recorder & VCR.
3
. Plug the RF Cable supplied into the jack on your
DVD Recorder & VCR.
4
. Plug the other end of the RF Cable into the connector
previously used for the aerial on the television.
Case 1 : Connecting DVD Recorder &
VCR to the TV using the SCART Cable
▌
You can connect your DVD Recorder & VCR to the
television using the SCART cable if the appropriate
input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD Recorder
& VCR
1
. Connect the Aerial Cable.
2
. Connect one end of the SCART cable to the AV1 (TV)
jack on the rear of the DVD Recorder & VCR.
3
. Plug the other end into the appropriate connector on
the television.
Regardless of the type of connection chosen, you
must always connect the RF Cable. Otherwise,
no picture will be visible on the screen when the
DVD Recorder & VCR is switched off.
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
■
■
Connecting & Setting Up
To RF IN
To RF OUT
RF Cable
To ANT INPUT
TV
ANT
SCART Cable
RF Cable
ANT
TV
Aerial
01293M-VR350,355-XEH-ENG.indb 16
01293M-VR350,355-XEH-ENG.indb 16
2007-03-12 오후 12:13:17
2007-03-12 오후 12:13:17
