Samsung DVD-VR300 Instruction Manual Download Page 54

Page: 54 / 107

English

layback

Zooming-In

Press the ANYKEY button during playback.

Use

❷

buttons to select Zoom, and then

press the OK button.
• will be displayed.

Press

❷➛❿

buttons to move to the area you

want to enlarge.

Press the OK button.
• The screen will be enlarged to twice the normal

size.

• If you press the OK button again after the

screen was enlarged to twice the normal size,
the screen size will be enlarged to four times
the normal size.

DVD-VIDEO

normal size 2X 4X 2X

DVD-RAM/DVD-RW

normal size

DVD-R

Clearing a Bookmark

Press the MARKER button.

Bookmark

Press

➛❿

buttons to select a marked scene

you want to delete.

Press CLEAR button to delete the selected
Bookmark.

To return to the normal size, press the OK button
repeatedly until the screen becomes of normal
size.

When recording is done in the EP mode the

Zoom function will not be supported.

(Only VR mode)

Note

Summary of Contents for DVD-VR300












































































































Search results

Summary of Contents for DVD-VR300

Reviews:

Related manuals for DVD-VR300

Brands by name

Popular brands

Samsung DVD-VR300, Instruction Manual

Search results

Summary of Contents for DVD-VR300

Reviews:

Related manuals for DVD-VR300

Brands by name

Popular brands