VCR Deck Operating Description
8-10
Samsung Electronics
Fig. 8-12 Transmission Path of Operation
8-6 System Control and Mechanical Operations
8-6-1 Mechanical Operation
The operation of mechanism is performed by rotation of the loading motor, and the transmission path of the oper-
ation is as shown in Fig. 8-12.
Loading Motor
FL drive slider
Loading drive gear
Pinch drive lever
Tension drive lever
S brake
T brake
Up/Down lever
FL arm lever
Mode SW
No.9 guide
S, T slider
Pinch lever
Tension lever
Cassette holder
FL cam gear
Cam slider
Fig. 8-14 shows each mode and mechanism status in each mode concerned with the rotation of the FL cam gear or
cam slider shift. The mechanism operates as shown in Fig. 8-13 according to the timing chart in Fig. 8-14.
Note :
The Start Sensor is actuated by the horizontal moving of Slider FL Drive and turned on or off by insertion or ejec-
tion of a cassette.
