VCR Deck Operating Description
Samsung Electronics
8-25
[7] REC mode
<REC mode>
(1) When the [REC] button is pressed in the stop mode, the mechanism enters the REC mode.
(2) The cylinder motor starts and then the loading motor rotates in reverse direction.
The cam slider reaches the position IV (playback mode).
The tape is taken up at a constant torque. The mechanism operations are the same as those in the playback.
(3) IC601 controls the audio circuit and video circuit to set the record enable mode.
(4) Recording mute is released, thus setting the recording status. The CTL signal is output for recording.
<REC PAUSE mode>
(1) When [PAUSE] button is pressed in the REC mode, the mechanism enters the REC pause mode.
(2) IC601 controls the audio circuit and the video circuit, and releases the record enable mode and performs the
rewinding for synchronous editing.
(3) After completion of the rewinding for synchronous editing, the cam slider is in the position IV (playback
mode), the cylinder motor is rotating, and the capstan motor and the loading motor stop.
