Samsung DVD-V 80, Instruction Manual

Page: 23 / 112

Recoding from Another VCR or Camcorder
Using the Assemble Edit Function
Connecting an RCA Audio/Video Input Cable
44 45
GB GB
VCR
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available on
the equipment chosen.
Examples:
◆
You wish to copy a video cassette with the help of a
second VCR (see page 45).
◆ You wish to play back and/or copy pictures taken
with a camcorder (see page 45).
☛
◆ Make sure that both the television and the DVD-VCR
are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the DVD-VCR.
➢
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
VCR
VCR
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your DVD-VCR.
2 Press the
❿
ll button to start playback.
3 When you reach the position from which you wish to start the new
recording, press the
❿
ll button.
4
Press the F.ADV/STEP ( ) button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5 While the DVD-VCR is in still mode, hold the REC button ( ● )
down for a while to activate the Assemble Edit function.
6
Select the source from which you wish to record by pressing:
◆ The PROG ( or ) buttons for television channels
◆ The INPUT SEL. button for the AV1, AV2 or AUX input sources
7
Press the
❿
ll button to start recording.
8
When you have finished recording, press ■ .
OK
2
5
4
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied, to
the appropriate SCART audio and video input connectors on the
rear of your DVD-VCR, as indicated on page 13.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4 Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR:
◆ AV1, AV2 for the SCART input
◆ AUX for the RCA input
5 Start playing back the cassette to be copied.
6
Hold REC (
●
) down for a while to start recording on your
DVD-VCR.
7 When you have finished recording, press ■ on both VCR and
DVD-VCR.
➢
If you wish to view the cassette being copied:
◆ Your DVD-VCR must be connected as usual to the
television (see page 13 for further details)
DVD VCR AUX
DVD VCR AUX
1
3
3
OK
7
6
EJECT
STANDBY/ON
DVD PROG VCR AUX
2