Samsung DP700A3D User Manual Download Page 140

Page: 140 / 145

138

139

Chapter 6

Appendix

Product Specifications

Registered Trademarks

Samsung is a registered trademark of Samsung Co., Ltd.
Intel, Core™ i3/i5/i7 are registered trademarks of the Intel

Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the

Microsoft Corporation.
The terms HDMI and HDMI High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.
All other product or company names mentioned herein are

registered trademarks of their respective companies.

ENERGY STAR® Partner

As an ENERGY STAR® Partner, SAMSUNG has

determined that this product meets the ENERGY STAR®

guidelines for energy efficiency.

HDMI

Summary of Contents for DP700A3D


















































































































































Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands

Samsung DP700A3D, User Manual

Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands