Samsung DP700A3D User Manual Download Page 64

Page: 64 / 145

Chapter 3.

Using the computer

LCD Instruction

Samsung Computer’s Defective LCD pixel management

standard

Although Samsung Electronics, Co., Ltd. observes strict

quality and confidence specifications for LCD manufacturing,

the company must inevitably allow a few defective cells in

panels due to a technological limitation of the manufacturing

process.
Therefore Samsung observes and manages the following dot

principles:
- Bright dot : 2 or less

- Black dot : 4 or less

- Combination of Bright and Dark : 4 or less

Instructions for Cleaning the LCD

Clean the LCD panel with a soft cloth lightly moistened with

computer cleansing detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the

LCD.

Summary of Contents for DP700A3D


















































































































































Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands

Samsung DP700A3D, User Manual

Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands