Samsung DP700A3D User Manual Download

Page: 103 / 145

102

Chapter 5.

Troubleshooting

Recovering/Backing up the Computer

(Optional)

If a problem occurs with your computer,

Recovery

(recovery

program) allows you to easily restore your computer to the default

(factory) settings. Alternatively, you can back up your computer so

that you can restore it to your preferred state at any time.

Recovery Introduction

Help

Recover

Back Up

Function

Description

Back Up

You can back up your entire Windows drive.

Recover

Restores the entire Windows drive.

Recovery may not be provided or may be a different

•

version depending on the model.
For models whose hard disk or SSD capacity is less than 64

•

GB, the Recovery program is not provided.
The instructions are provided based on Recovery 6.0

•

version. Some functions may differ slightly or be excluded

depending on the version. Refer to the program's Help

section for more information.
An ODD (CD/DVD drive, etc.) is not supported by the

•

Recovery program.

Summary of Contents for DP700A3D


















































































































































Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands

Samsung DP700A3D, User Manual

Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands