Samsung DP700A3D User Manual Download Page 28

Page: 28 / 145

Chapter 1

Getting Started

Turning the Computer On and Off

Turning the computer on

Connect the

AC adapter

DC-in Jack

AC Adapter

Powe Cable

Press the

Power button

to turn the computer on.

Power indicator

is lit while the computer is turned on.

About Windows Activation

When you turn the computer on for the first time, the Windows

activation screen appears.
Follow the activation procedures according to the instructions on

the screen to use the computer.

If the screen is not displayed when you turn the

computer on (for corresponding models only)

Press the

•

touch button

to turn the LCD on.

If “HDMI” message is displayed on the screen, press the

•

touch button

to switch the LCD panel to the

PC mode

Summary of Contents for DP700A3D


















































































































































Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands

Samsung DP700A3D, User Manual

Search results

Summary of Contents for DP700A3D

Reviews:

Related manuals for DP700A3D

Brands by name

Popular brands