08_
setting up
REMOVING THE REFRIGERATOR
DOORS
If your entrance won’t allow the refrigerator to pass
easily through it, you can remove the doors.
1. Removing the Front Leg Cover
First, open both the freezer and refrigerator doors,
and then take off the front leg cover by removing
the three screws counter-clockwise.
Separating the Water Supply Line from
the Refrigerator
1. Remove the water line by pressing the coupler
1
and pulling the water line
2
away.
2. Removing the freezer door
A few things to mention fi rst.
• Make sure that you lift the door straight up so
the hinges are not bent or broken.
• Be careful not to pinch the water tubing and
wire harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
1. With the Freezer door closed, remove the upper
hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them
apart
2
.
2. Remove hinge screws
3
and the ground
screw
4
by turning counter-clockwise, and
take off the upper hinge
5
. Be careful that the
door does not fall on you as you are removing
it.
3. Next, remove the door from the lower hinge
6
by carefully lifting the door straight up
7
.
Be careful not to pinch the water tubing
and wire harness on the door.
4. Remove the lower hinge
8
from the bracket
9
by gently lifting the lower hinge upwards.
2
1
3
4
5
7
6
1
2
Be careful
that the
water tube
match same
colour.
DA99-02291S-02.indb 08
DA99-02291S-02.indb 08
2014. 7. 19.
9:00
2014. 7. 19.
9:00