10_
setting up
Reattaching the Fridge Door
1. Insert the lower hinge
1
back into the lower
hinge bracket
2
.
2. Fit the hole in the corner of the fridge door
3
over the lower hinge
4
.
3. Insert the upper hinge shaft
5
into the hole
on the hinge
6
. Make sure the hinge is level
between the upper hinge hole
7
and the hole
on the top of the cabinet
8
. Then, reattach
hinge screws
9
and the ground screw
10
by
turning it in a clock wise direction.
4. Place the front part of the upper hinge cover
11
on the front of the upper hinge
12
and
reattach it with the screw.
Reattaching the Water Supply Line
1. Insert the water line
2
into the coupler
1
.
2. The Water Line must be fully Inserted to the
center of transparent coupler to prevent water
leakage from the dispenser.
3. Insert the 2 clips in the install pack and check
that each clip holds the line fi rmly.
Do not cut the water line.
Gently separate it from the coupler.
Reattaching the Front Leg Cover
Before attaching the cover, check water
connector for leakage.
Replace the front leg cover by turning the
three screws clockwise, as shown in the
fi gure.
1
2
3
4
12
11
1
2
Center of transparent coupler
Center of transparent coupler
clip A (1/4”) (6.35 mm)
clip A (1/4”) (6.35 mm)
DA99-02291S-02.indb 10
DA99-02291S-02.indb 10
2014. 7. 19.
9:00
2014. 7. 19.
9:00
