Samsung D61B, Training Manual

Page: 27 / 116

Introduction PDP
Samsung Electronics 4-17
Reset Period
Sustain elimination discharge
a. Very thin Pulse elimination method
b. full width Pulse elimination method
c. Self-erase elimination method
d. Infirm discharge elimination method
Wall Charge Set-up for Address
: Actually, made wall charge profit of Ramp or RC pulse by infirm discharge
Contrast
: To make Back Ground bright interference Contrast
Drive Margin
.
.
.
.
Address Period
Based action :
An address electrode and with a Y-electrode between generate discharge,
Selected cell and not selected cell by Sustain Pulse have different
characteristic with wall charge
Write Address / Erase Address
Non Address Failure
: Address Pulse - Scan Pulse potential difference & Scan width a design
High speed Addressing
: It is important technique for high resolution, high brightness, low cost
Discharge delay reduction by discharge condition improvement and drive waveform
Low voltage Address
: It is profitable of cost down by reduce resisting pressure Driver IC.
.
.
.
Sustain Period
Pulse form
: Input alternation pulse to X-electrode and Y-electrode
Reality picture realizable sustain discharge
: It is decide sustain discharge of wall charge difference separated with a cell between
by address discharge
Sustain drive Margin
a. Drive of sustain discharge : decided by Panel s Vs value
b. The first stage drive : Reset discharge / Made Wall Charge selectivity by Address
discharge and panel s Vf
Efficiency improve
: It is many power consumption and need efficiency improve in Sustain discharge
.
.