14
3
Chapter Three: Adjusting Your Monitor
PowerSaver
This monitor has a built-in power management system
called PowerSaver. This system saves energy by switch-
ing your monitor into a low-power mode when it has not
been used for a certain amount of time. The available
modes are “On,” “Standby,” “Suspend,” and “Off.”
This system operates with a VESA DPMS compliant
video card installed in your computer. You use a software
utility installed on your computer to set up this feature.
See the table below for details.
Power Saving function mode EPA/NUTEK
State
Normal
Standby mode
Suspend mode /
Power-off Mode /
Operation
Position A1
Position A2
Horizontal Sync Active
Inactive
Active
Inactive
Vertical Sync
Active
Active
Inactive
Inactive
Video
Active
Blanked
Blanked
Blanked
Power
Green
Amber
Amber/Green
Amber
Indicator
Blinking
Blinking
Power
130W (max.)
65W (nominal)
Less than 15W
Less than 5W
Consumption
110W (nominal)
NOTE: This monitor automatically returns to normal oper-
ation when horizontal and vertical sync return. This
occurs when you move the computer's mouse or press a
key on the keyboard.
This monitor is EPA
E
NERGY
S
TAR
®
compliant and NUTEK
compliant when used with a computer equipped with
VESA DPMS functionality. If your computer system can-
not support a display power management function, you
can purchase an optional DPMS software program to
enable the power saving function. Please contact
Samsung or your dealer for more information.
For energy conservation, turn your monitor OFF when it is
not needed, or when leaving it unattended for long peri-
ods.
CS9839-E 10/8/98 10:52 AM Page 14
