1. Remove the wiring(CN3).
2. Remove the screw(1 piece) for temperature
sensor attachment.
3. Remove the temperature sensor.
1.
Remove the screw for the sensor attachment
on the back of exhaust duct.
2. Remove the gas sensor from the housing.
1. Remove the wiring.
2. Remove the screws(five pieces) for Bkt-cover
heater(u) setting.
3. Remove the heater attachment nut(2) with
7mm driver. (Then the gasket stopper and
gasket get apart)
4. Press the plate to remove the support-
heater(two pieces).
5. Remove the upper heater.
4-4 Replacement of Temperature Seneor
4-5 Replacement of Gas Sensor
4-6 Replacement of Upper Heater
(Bkt-cover heater(U), Gasket stopper,Gasket, Plate spring, Support heater)
4-2
Samsung Electronics
Disassembly and Reassembly
Temperature sensor
Temperature sensor
attachment screws
GAS sensor
attachmen
t screws
GAS sensor
A
B
SUPPORT-HEATER
*Hold on A part and push in direction of B.
PLATE SPRING
CAVITY
*Assembly procedure of gasket
UPPER HEATER
GASKET
GASKET GASKET
STOPPER
BKT-cover heater(U)
attachment screw
(5 pieces)
Plate spring
Support-
Heater
Upper heater(U)
attachment nut
(2 pieces)
BKT-cover heater(U)
