1. Remove the wiring(High voltage transformer
primary, fan motor, low voltage transformer,
Power cord input).
2. Remove the back-panel.(seven screws)
3. Remove the decoration-foot. (two screws)
4. Remove four BKT-holder slider(R,L)
attachment screws and eight base-plate
attachment screws.
5. Remove the nuts of noise filter.
6. Remove the base-plate.
7. Remove the wiring.
8. Remove the weight sensor assembly.
9. Remover the BKT-weight-sensor B.
10.Remove the lower heater attachment screws.
11.Remove the lower heater.
1. Remove the wiring(fan motor, low tension
transformer primary and secondary).
2. Remove the screws(two for fan motor and two
for low voltage transformer).
3. Remove the fan heater.
4. Remove the low voltage transformer.
4-13 Replacement of Lower Heater and Weight Sensor assembly
Samsung Electronics
4-5
4-14 Replacement of Fan Motor and Lower Voltage Transformer
Disassembly and Reassembly
Base-plate fixing screws
Base-plate fixing screws
Lower heater
Holder
Weight sensor assembly
Lower heater
fixing screws(two)
Noise filter
fixing nut
Decoration
foot
BKT-Holder Slider
R L fixing screws
Lower voltage transformer
Fan motor
Fan motor fixing screws(two).
Lower voltage transformer
fixing screws(two).
