1. Remove the magnetron from the BKT-HVT
removed as under (4-9).
2. Remove wiring.
3. Remove BKT-HVR.(Four screws)
4. Remove BKT-HVC.(one screw)
5. Remove high voltage condenser.
6. Remove high voltage transformer.
In case that condenser is charged with
electricity make short-circuit between chassis
and the high tension circuit.
1. Remove wiring.
2. Remove the noise filter attachment screws with
13mm wrench.
3. Remove the noise filter.
1. Remove spring arm with radio pincers. (left
and right each one)
2. Remove arm slider. (left and right each one)
3. Remove the spring-stopper.(one at the lower
left).
4. Open the door to remove it pressing lefthand.
4-10 Replacement of High Voltage Trans, Condenser and Diode
4-11 Replacement of Noise Filter
4-4
Samsung Electronics
Disassembly and Reassembly
HIGH VOLTAGE TRANSFORMER
BKT-HVC
HIGH VOLTAGE CONDENSER
HIGH VOLTAGE DIODE
BKT-HVR
BKT-HVT
Noise Filter
attachment screws
ARM-SLIDER(RIGHT)
ARM-SLIDER(RIGHT)
SPRING-ARM(RIGHT)
SPRING-ARM(RIGHT)
Noise Filter
SPRING-ARM (LEFT)
SPRING-ARM (LEFT)
ARM-SLIDER(LEFT)
ARM-SLIDER(LEFT)
4-12 Replacement of Door assembly
Method to detach the spring-arm
SPRING-ARM
This part is despatched
by turning the radio pincers
in the direction of A.
A
A
SPRING-STOPPER
SPRING-STOPPER
