Samsung CLX-9350ND Installation Manual Download | Manualshive

Page: 5 / 69

background image

About this installation guide

_ 4

Finding more information

You can find information for setting up and using your machine from the following resources, either as a print-out or on
screen.

MATERIAL NAME

DESCRIPTION

Installation Guide

This guide provides information on setting up your machine. Follow the instructions in the
guide to prepare the machine.

Quick Reference Guide

This guide provides operating procedures and descriptions of the most frequently used
functions.

User’s Guide

This guide provides you with step-by-step instructions for using your machine’s full
features, and contains information for maintaining your machine, troubleshooting, and
installing accessories.

Machine Driver Help

This help provides you with help information on printer driver and instructions for setting up
the options for printing.

(See the User’s Guide.)

Samsung website

If you have Internet access, you can get latest machine drivers, manuals, firmware and
ordering information from the Samsung website, www.samsung.com/printer.

Downloadable
softwares

You can download useful software from the Samsung website.

•

SyncThru

TM

Web Admin Service: convenient for network administrators who need to

manage many machines simultaneously. This software is for network models only.
(http://solution.samsungprinter.com)

•

Samsung AnyWeb Print

: helps personal users to screen-capture the website screen

in Windows Internet Explorer easily. (http://solution.samsungprinter.com/personal/
anywebprint)

•

XPS printer driver:

used to print XPS print path. XPS printer driver can be installed

only on Windows Vista OS or higher.
(www.samsung.com/printer)

«
...
3
4
5
6
7
...
»

Summary of Contents for CLX-9350ND






































































Reviews:

No comments

Related manuals for CLX-9350ND

EasyCoder 501 SA

Brand: UBI Pages: 214

Brand: UBI Pages: 64

WORKCENTRE 5735

Brand: Xerox Pages: 50

Brand: Oki Pages: 45

Brand: KIP Pages: 103

Brand: Savin Pages: 6

Brand: Oki Pages: 192

Tally Colour Laser T8006e

Brand: Tally Pages: 200

Brand: Xiamen Hanin Electronic Technology Pages: 27

Brand: LaserLine Pages: 14

ECOSYS P6230cdn

Brand: Kyocera Pages: 258

Brand: Ricoh Pages: 88

Brand: Star Micronics Pages: 127

Brand: Subli-Trans Xpres Pages: 16

V105 - All-in-One Printer

Brand: Dell Pages: 68

P703w - Photo All-in-One Printer Color Inkjet

Brand: Dell Pages: 105

Brand: Dell Pages: 125

Brand: Dell Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands