Samsung CLX-9350ND Installation Manual Download Page 64

Page: 64 / 69

Installing the supplied software

_ 63

After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click

Print a test page

Otherwise, just click

Next

and go to step 9.

If the test page prints out correctly, click

Yes

If not, click

to reprint it.

If you want to register your machine on Samsung web site, click

On-line Registration

If your machine is not connected to the network or computer, click

How to connect?

gives

detailed information about the how to connect the machine. Follow the instructions in the window.

10.

Click

Finish

•

After the driver setup, you may enable firewall.

•

If the printer driver does not work properly, follow the steps below to reinstall the driver.

Make sure that the machine is connected to your machine and powered on.

From the

Start

menu, select

Programs

All Programs

Samsung Printers

your printer driver name

Uninstall

Follow the instruction on the window to uninstall the driver.

Insert the software CD into your CD-ROM drive and reinstall the driver.

Summary of Contents for CLX-9350ND






































































Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands

Samsung CLX-9350ND, Installation Manual

Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands