Samsung CLX-9350ND Installation Manual Download

Page: 12 / 69

Setting up the hardware

_ 11

Unpacking and placing the hardware

Follow the steps below:

Select a stable location.

Unpack the machine and check all the enclosed items. Included items may differ depending on the country

Remove all the tapes.

•

Make sure that yellow, magenta, cyan and black toner cartridges are enclosed.

•

Make sure that yellow, magenta, cyan and black imaging units are enclosed.

•

If any items are missing or damaged, notify your dealer immediately.

•

The appearance of the power cord may differ depending on your country’s specifications. The power cord must
be plugged into a grounded power socket.

TONER CARTRIDGE

IMAGING UNIT

POWER CORD & USB CABLE

INSTALLATION GUIDE & WARRANTY CARD

SOFTWARE CD & USER’S GUIDE CD

QUICK REFERENCE GUIDE

ACCESSORY BOX AND CLEANING CLOTH

RUBBER PACKING(2)

Summary of Contents for CLX-9350ND






































































Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands

Samsung CLX-9350ND, Installation Manual

Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands