Samsung CLX-9350ND Installation Manual Download | Manualshive

Page: 4 / 69

background image

About this installation guide

_ 3

1

.

About this installation guide

This installation guide provides information about the installation of the machine as well as
detailed explanation on how to install with step-by-step instructions. This installation guide is
valuable for both novice and professional users. You can refer to this as a guide for installing and
setting up the machine.

•

Read the safety information before using the machine.

•

If you have a problem using the machine, refer to the troubleshooting chapter. Refer to User’s Guide on the
User’s Guide CD.

•

Use Index to find information.

•

All the illustrations in this installation guide may differ from your machine depending on its options or models.

•

The procedures in this user’s guide are mainly based on Windows XP.

Convention

Some terms in this installation guide are used interchangeably, as shown below:

•

Document is synonymous with original.

•

Paper is synonymous with media, or print media.

•

Machine refers to printer or MFP.

The following table offers the conventions of this guide:

CONVENTION

DESCRIPTION

EXAMPLE

Bold

For texts on the display or button names on the
machine.

Start

Note

Provides additional information or detailed
specification of the machine function and
feature.

The date format may differ from
country to country.

Caution

Gives users information to protect the machine
from possible mechanical damage or
malfunction.

Do not touch the green surface of the
toner cartridge.

Footnote

Provides additional more detailed information
on certain words or a phrase.

a. pages per minute

(“Cross-reference”)

Guides users to a reference page for the
additional detailed information.

(See "Finding more information" on page 4.)

«
...
2
3
4
5
6
...
»

Summary of Contents for CLX-9350ND






































































Reviews:

No comments

Related manuals for CLX-9350ND

Brand: Lanier Pages: 138

Brand: Lanier Pages: 236

Brand: Oki Pages: 4

Brand: Olivetti Pages: 22

Brand: Oce Pages: 306

Brand: Printek Pages: 31

Brand: Sagem Pages: 126

bizhub C452 Series

Brand: Konica Minolta Pages: 17

Brand: A&D Pages: 24

Brand: Xerox Pages: 8

Brand: Microcom Pages: 73

Brand: SPRT Pages: 15

ExpressCard 500

Brand: Magtek Pages: 49

Brand: Panduit Pages: 59

Brand: Skip-Line Pages: 11

Brand: Sam4s Pages: 24

Brand: SIGN RACER Pages: 73

AcuLasaer C1900

Brand: Epson Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands