Samsung CLX-9350ND Installation Manual Download

Page: 11 / 69

Setting up the hardware

_ 10

Installation flow of the hardware

We recommend you refer to the below installation flow to install the hardware.

Set installation location and check included items in the package.

Remove all the packing pads and tapes.

Install the Duplicate Automatic Document Feeder(DADF).

Do you need to install the Right Output Tray?

Yes

Install the Right Output Tray.

Install Toner Cartridges and Imaging Units.

Yes

Do you need to install the Standard finisher or the Booklet finisher?

Install the Bridge kit.

Install the Finisher.

Do you need to install other option items?

Yes

Install purchased other option items.

Load paper into the trays of the machine.

Connect a printer cable to the machine.

Connect a power cord to the machine and turn on the power.

Set the initial setting and test the machine.

Explain to customer how to use the machine.

Install the machine with the one of the purchased items

: Cabinet Stand, Dual Cassette Feeder, or High Capacity Feeder.

Summary of Contents for CLX-9350ND






































































Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands

Samsung CLX-9350ND, Installation Manual

Search results

Summary of Contents for CLX-9350ND

Reviews:

Related manuals for CLX-9350ND

Brands by name

Popular brands