2-12
Installation and Connection
To disconnect the projector from a PC.
Make sure to end the connection properly to prevent damage to the projector or your data.
1.
Click
on the Windows Taskbar.
2.
Click the pop-up message.
3.
Disconnect the USB cable only when the message says that it is safe to remove the hardware.
•
Do not disconnect the USB cable while the files are being copied, as this could result in loss of data or damage to
the projector.
•
The connection will not end if you have projector files open on the PC. Close all projector files and try again.
•
Other versions of Windows operate similarly. Follow the correct procedure for removing a USB device from your PC
safely for your version of Windows.
