Major Safety Precautions
1-3
Cleaning Related
Warning
Caution
Do not expose the adaptor to water. Do not let
the adaptor to get wet.
•
Water can cause a malfunction, electric
shock or fire. Do not use adaptor by the
waterside or outside particularly when
it rains or snows. Do not let the adaptor
to get wet when you clean the floor with
water.
Do not place the adapter on top of another
adapter.
•
It may result in fire.
Keep power adaptor away from any other
heat source.
•
Otherwise, it may result in fire.
Remove the vinyl cover of the adapter before
using the adaptor.
•
Otherwise, it may result in fire.
Do not open any cover on the product.
•
This would prove hazardous because
of high-voltage current inside the
product.
Avoid going near the exhaust vents or lens.
Both emit extreme heat when the projector is
operating and immediately after the projector
is turned off.
Be particularly careful not to let any of your
body parts contact the exhaust vents when
the projector is operating.
Note that the exhaust vents stay hot even
after the projector is powered off.
Do not place objects vulnerable to heat near
the projector.
The lens may be hot. Be careful not to contact
it. (Children and people with sensitive skin
should be most cautious.)
Do not clean the product case or body using
water spray or a wet cloth. Avoid using any
chemicals such as detergents, industrial or
automotive polish, abrasive, wax, benzene,
alcohol on any plastic part of the product such
as projector case, since this may cause
damage.
Using surfactant which contains a large
amount of alcohol, solvent, or other strong
chemicals may result in discoloration,
cracking, or damage to the product exterior.
Be sure to use the recommended cleansing
agent only.
You can purchase the recommended
cleansing agent from a service center.
When cleaning the product, disconnect the
power cord and clean the product with a soft
dry cloth.
•
Avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquito-
repellent, fragrance, lubrication or
cleansing agent when cleaning the
product.
•
This may result in the exterior being
deformed or the print being removed.
To clean dirt or stains on the front projection
lens, dampen a clean cloth with a small
amount of lens cleaner or a neutral detergent
and water, and then rub gently.
Ask a Service Center to clean the interior of
the projector at least once per year.
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
30
LUMEN
!
30
LUMEN
!
SAMSUNG
!
