11
If you have connected a LAN cable to
5.
the Blu-ray player, the Blu-ray player
automatically verifies your wired network.
a
Previous
d
Skip
?\
Move
"
Select
Initial Settings I Network - Wired
Auto
Manual
Choose the method to configure Internet Protocol (IP). Please make
sure that the Ethernet cable is connected.
Auto : Configure IP automatically
NOTE
✎
If you have no network, select Skip
■
by pressing the
BLUE (d)
button,
and then go to Step 7.
After the player verifies the network,
6.
press the
v
button.
The Initial Settings Complete window
7.
appears and remains on the screen for a few
moments. Then, the Home screen appears.
NOTES
✎
The Home screen will not appear if
■
you do not configure the player's
settings during Setup, except as
noted below.
If you press the
■
BLUE (d)
button
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
If you do not complete network set
■
up during the Initial Setup, you can
do it later. See page 13.
When you return to the Home
■
screen, the full screen mode is
cancelled automatically.
If you want to display the Setup
■
screen again to make changes, press
the
^
button on the front panel of
the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
After the Setup process is complete, you
■
can operate the HDMI-CEC function.
If you want to use an
■
(HDMI-CEC) function to aid in the
initial set up process, please follow
the instructions below.
1) Connect the player to an
(HDMI-CEC) compliant
Samsung TV using an HDMI Cable.
2) Set the (HDMI-CEC) feature
to On in both the TV and the player.
3) Set the TV to the Setup Procedure.
If you leave the player in the stop
■
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off.
Menu Navigation
SCREEN
VIEW
A-B
FULL
BONUS REPEAT REPEAT
1
2
4
3
1
HOmE
Button : Press to move to
the Home menu.
2
RETURN
Button : Return to the
previous menu.
3
v
(Enter) / dIRECTION
Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4
ExIT
Button : Press to exit the
current menu.
Home menu
●
App 1 App 2 App 3 App 4 App 5 more Change device Settings
pLAy dISC
pHOTOS
VIdEOS
mUSIC
No Disc
2
3
6
5
7
1
4
8
1
Access and play VIDEOS.
2
Access and play MUSIC.
3
Access and change SETTINGS.
4
Change the Source Device.
5
Access and view PHOTOS.
6
Play a DISC.
7
Access and use APPLICATIONS.
8
Access MORE APPLICATIONS.
NOTE
✎
The Videos, Photos, and Music
■
options require that you have an
appropriate disc in the player or a USB
flash device attached to the player.
Accessing the Settings Menu
To access the Settings menu and sub-
menus, follow these steps:
Press the
1.
POWER
button.
The Home Menu appears.
Press the ▲▼◀▶ buttons to
2.
select
Settings,
and then press the
v
button.
Press the ▲▼ buttons to select
3.
the desired submenu, and then
press the
v
button.
Press the ▲▼ buttons to select
4.
the desired item, and then press
the
v
button.
Press the
5.
EXIT
button to exit the
menu.
NOTES
✎
The access steps may differ depending
■
on the menu you selected. The OSD
(On Screen Display) may change in
this player after you upgrade the
software version.
Picture Settings
You can configure various display
options such as the TV Aspect Ratio,
Resolution, etc.
TV Aspect Ratio
Depending on the type of television
you have, you may want to adjust the
screen size setting.
NOTES
✎
Depending on the disc type, some
■
aspect ratios may not be available.
If you select an aspect ratio and
■
option which is different than the
aspect ratio of your TV screen, the
picture might appear to be distorted.
