Symptom
Check
Remedy
The HUB doesn't work properly.
t
Is the HUB plugged in?
t
Is the LAN cable connected to
the wireless router and the HUB
properly?
t
When the Hub is plugged in, do
the HUB's front indicators show
it's operating properly?
t
Plug in the HUB.
t
Connect the LAN cable to an
ETHERNET SWITCH
port on
the back of the HUB and to your
wireless router.
t
Reset the HUB. (Refer to the HUB's
user manual for details.)
t
If you experience troubles with
connecting the HUB and WAM
speaker, try relocating the WAM
speaker so that it is closer to the
wireless router or HUB.
The WAM speaker doesn't work
properly.
t
Is the product plugged in?
t
Does the product's front LED
indicator remain red 5 minutes
after turning on?
t
Plug in the product.
t
Check whether the Wi-Fi router
you're using had been certified for
Wi-Fi.
t
Unplug the speaker, plug it back
in, and then reconnect it to the
router.
t
Reset the WAM speaker. (see page
5)
Click here.
t
If used with a HUB
- Make sure your smart device
and the HUB are connected to
the same Wi-Fi network.
- Make sure the HUB's indicator
LED's show that it is working
correctly. (See page 16, item 3.)
Click here.
- If the problem persists, reset the
HUB. (Refer to the HUB's user
manual for details.)
- Unplug, then plug in the HUB.
Then, unplug and plug in the
WAM speaker.
- If you experience troubles with
connecting the HUB and WAM
speaker, try relocating the
speaker so that it is closer to
the wireless router or HUB.
56
44
