A
Connecting with a HUB (Not Included)
o
If the WAM speaker fails to connect to your network or its network connection operates
abnormally, place the speaker closer to the HUB or your router and try again.
o
The WAM speaker is a wireless network device. Its communications with your network
may be disrupted because of the distance between it and other devices on the network,
obstructions, or interference from other wireless devices.
1
Connect a LAN cable to the router and the
ETHERNET SWITCH
on the back of the
HUB.
NOTE
9
You can connect the LAN cable to any
ETHERNET SWITCH
Port on the HUB.
2
Attach the HUB's power cord to the power port on the rear of the HUB, and then plug
the power cord into an electrical outlet.
3
The power ( ) and the HUB ( ) indicators on the HUB's front turn on.
When the pairing indicator (
) begins to flash, plug the speaker(s) into an outlet.
The LED indicator on the speaker starts to flash.
If the HUB's pairing indicator does not flash, press the
SPK ADD
button on the rear of
the HUB.
NOTE
9
If you are adding multiple WAM speakers, connect all the speakers to electrical outlets. If you are not
connecting all the speakers, refer to pages 20~21.
Click here.
Wireless Router
LAN
Plug In
HUB
Plug In
16
44
