4
Wait until the LED indicator on the speaker stops flashing. If the speaker's LED indicator
turns solid blue, pairing is complete. The speaker may also beep.
NOTES
9
Place each speaker at least 20 inches (50 cm) from the HUB when connecting them to the HUB.
9
Your smart device cannot connect to the WAM speakers or the HUB if there is no wireless router.
9
To confirm you have a proper connection, check the pairing indicator on the front of the HUB.
- When you turn on the HUB for the first time, there is a 20 minute pairing period.
The pairing indicator (
) will blink for these 20 minutes or until pairing occurs. When you press
the
SPK ADD
button to pair additional speakers, the pairing period is reduced to 10 minutes. The
pairing indicator (
) flashes for 10 minutes or until pairing occurs. Turn on the WAM speaker you
want to pair with the HUB while the pairing indicator is flashing.
- If pairing mode is turned off, start pairing mode again by pressing the
SPK ADD
button on the rear
side of HUB and restart the speaker, or press and hold both
Source
and
Standby
buttons at
the same time for more than 5 seconds.
9
For a proper connection, connect the HUB to your router before turning on your WAM speaker.
- Connecting the speaker to the HUB may take a few minutes.
- There will be a brief sound when the connection is established.
5
Connect your smart device to your Wi-Fi network. (The HUB and the smart device should
be connected to the same router.)
17
44
