background image

3-2

Samsung Electronics

Operating Instructions and Installation

1.  A U TO MODE : In this mode, operation

C O O L mode is selected automatically by the
room temperature of initial operation.

T= -1°, -2°C, 0°C+1°C+2°C

T is controlled by setting temperature

up/down key of remote contro l l e r

* FAN SPEED : A U TO

2.  C O O L MODE : The unit operates accord i n g

to the diff e rence  between the setting and
room temperature. (18°C~30°C) 

3.  D RY MODE : Has 3 states, each determined

by room temperature .
The unit operates in DRY m o d e .
*Co m p ressor ON/OFF Time is contro l l e d
compulsorily(can not set up the fan speed,
always bre e z e ) .
* P rotective function  :  Low temperature
release. (Prevention against fre e z e )

4.  TURBO MODE : This mode is available in

A U TO, COOL, DRY, FAN MODE.
When this button is pressed at first,  the air
conditioner is operated “powerful” state for
30 minutes re g a rdless of the  set tempera-
t u re, room temperature .
When this button is pressed again, or when
the operating time is 30 minutes,  turbo
operation mode is canceled and returned to
the previous mode.
*But, if you press the TURBO button in DRY
or FAN mode that is changed with A U TO
mode automatically.

5 . S L E E P MODE :  Sleep mode is available

only in COOL m o d e .
The operation will stop after 6 hours.
*In COOL mode :  The setting temperature
is automatically raised by 1°C each 1hour
When the temperature has been raised by
total of  2°C, that temperature is main-
t a i n e d .

6.  FAN SPEED : Manual (3 step), Auto (4 step)

Fan speed automatically varies depending
on both the diff e rence between setting and
the room temperature .

Operation Type

Cool Operation

Room Temp

Tr

 24.5°C+

T

Compressor ON

Tr

 24°C+

T

Compressor OFF

3-1-2 Name & Function of Key in remote controller

Summary of Contents for AM18A1(B1)E09






















































Reviews: