31
English
Installation Pr
oc
edur
e
Indication and
details
3
4
Indoor 4
4
2 °C
Use (*8)
1
Oil return or Noise
decreasing in
defrost mode
4
Turn out in
180 min.
without
motion
2
38 seconds
5
5 °C
Use (*8)
5
Turn out
in 30 min.
without
motion or
advanced
function (*1)
6
Turn out
in 60 min.
without
motion or
advanced
function (*1)
7
Turn out in
120 min.
without
motion or
advanced
function (*1)
8
Turn out in
180 min.
without
motion or
advanced
function (*1)
(*1)
Advanced function: Either controlling the cooling or heating current or power saving with motion detection.
(*2)
Minimizing fan operation when thermostat is off: The fan operates for 20 seconds at an interval of 5 minutes in the
Heat mode.
(*3)
1: The fan is turned on continually when the hot water heater is turned on, 3: The fan is turned off when the hot
water heater is turned on with cooling only indoor unit.
(Cooling only indoor unit: To use this option, install the Mode Select switch (MCM-C200) on the outdoor unit and fix
it to the Cool mode.)
(*4)
When the following 2 or 3 is used as external heater On or Off signal, the signal for monitoring external contact
control will not be output.
2: The fan is turned on continually when the external heater is turned on,
3: The fan is turned off when the external heater is turned on with cooling only indoor unit
[To use this option, either an Operation Mode Selector (MCM-C200) must be installed onto the outdoor unit and the air
conditioner must be fixed to Cool mode, or both the indoor and outdoor units must be set to ‘cooling only’ by using a
higher-level communication controller (DMS2.5, Touch Centralized Controller, 16 room on/off controller)].
NOTE
࡛ Ã˙ϩ˵ʪ˙ɇ̈͝ϑϑʪϩϩͱͱ˙˙˙ͱθʀͱͱ̷̈͝˝ͱ̷͝ц̈͝ʒͱͱθЇ̈͝ϩɵцϑʪϩϩ̈͝˝ϩ˵ʪƊk߫॔ߥͱθƊkߣߧ॔ߥࡥцͱЇ͝ʪʪʒϩͱЇϑʪɇ͝ʪуϩʪθ͝ɇ̷
sensor or wired remote control sensor to detect indoor temperature exactly.
Summary of Contents for AM071NN1DEH/TL
Page 40: ...DB68 07552A 00...
