5
English
Instal
lation Pr
oc
edur
e
Installation Procedure
Step 1 Choosing the installation location
Installation location requirements
• Do not place the outdoor unit on its side or upside
down. Failing to do so may cause the compressor
lubrication oil to run into the cooling circuit and lead
to serious damage to the unit.
• Install the unit in a well-ventilated location away from
direct sunlight or strong winds.
• Install the unit in a location that would not obstruct
any passageways or thoroughfares.
• Install the unit in a location that would not inconvenience
or disturb your neighbors, as they could be affected by
the noise or the airflow coming from the unit.
• Install the unit in a location where the pipes and the
cables can be easily connected to the indoor unit.
• Install the unit on a flat, stable surface that can
withstand the weight of the unit. Otherwise, the unit
can generate noise and vibration during operation.
• Install the unit so that the air flow is directed towards
the open area.
• Maintain sufficient clearance around the outdoor unit,
especially from a radio, computer, stereo system, etc.
Air Guide Duct (This product is not provided by Samsung)
7.87 inch(200 mm)
Outdoor Unit
11.81 inch (300 mm)
4.92 ft (1.5 m) or more
4.92 ft (1.5 m) or more
3.28
ft (
1 m
) or
mor
e
3.28
ft (
1 m
) or
mor
e
Fuse
Control
Stereo Computer etc
Indoor Unit
• Install the unit at a height where its base can be firmly
fixed in place.
• Make sure that the water dripping from the drain hose
runs away correctly and safely.
CAUTION
• You have just purchased a system air conditioner and
it has been installed by your installation specialist.
• This device must be installed according to the
national electrical rules.
• If your outdoor unit exceeds a net weight of 132.2 lb (60 kg),
do not install it on a suspended wall, but stand it on a floor.
• The reliability of our product cannot be guaranteed
under conditions of -13 ℉ (-25 ℃) or less.
• When installing the outdoor unit at the seaside, make
sure that it is not directly exposed to sea breeze. If you
cannot find an adequate place free from direct sea
breeze, construct a protection wall or a protective fence.
‐
Install the outdoor unit in a place (such as near
buildings etc.) where it can be prevented from sea
breeze. Failure to do so may cause a damage to the
outdoor unit.
Sea breeze
Sea breeze
Outdoor Unit
Outdoor Unit
Sea
Sea
• If you cannot avoid installing the outdoor unit at the
seaside, construct a protection wall around to block
the sea breeze.
• Construct a protection wall with a solid material such
as concrete to block the sea breeze. Make sure that the
height and the width of the wall are 1.5 times larger
than the size of the outdoor unit. Also, secure a space
larger than 27.6 inch (700 mm) between the protection
wall and the outdoor unit for exhausted air to ventilate.
Outdoor Unit
Protection wall
Sea breeze
Sea
CAUTION
• Depending on the condition of the power supply,
unstable power or voltage may cause malfunction of
parts or control system (example: on a boat or places
using power supplied from electric generator, etc.).
Installation Procedure
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 5
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 5
2023-09-22 오후 1:46:53
2023-09-22 오후 1:46:53
