28
Installation Procedure
English
Instal
lation Pr
oc
edur
e
Operation
Indication
Step 11
Press button to be changed to HEAT mode in the OFF status
1
Press button to enter SEG23 value.
2
Press button to enter SEG24 value.
Step 12
Press button to check whether the option code you entered is correct or not.
Press operation button
to enter option.
Setting the indoor unit addresses automatically
NOTE
• For the best results, make sure that electrical wiring is done properly.
•
For the best results, the outdoor temperature should be between 41 to 104 ˚F (*) and the indoor temperature 60.8 ˚F or
higher (*).
※ (*) Auto addressing may fail when the temperature is out of the range above. In this case, set the address manually.
CAUTION
• Connecting one indoor unit to this product is prohibited. Don't use pipe checking operation and auto addressing
mode when only one indoor unit is installed.
PCB MAIN - OUT
K1 K2
K3 K4
DISPLAY 1
DISPLAY 2
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 28
DB68-12535A-00_IM_23Y FJM Outdoor_AA_EN_.indd 28
2023-09-22 오후 1:46:59
2023-09-22 오후 1:46:59
