17
EN
G
LIS
H
Checking the remote controller
Function may be different depending on the model.
f
f
Point the remote controller towards the remote control receiver of the unit.
f
f
When the button is pressed, you will hear ringing or beep sound and Transmit indicator ( ) will appear on the remote
controller display.
Remote controller buttons
Lighting
WPS
Wi-Fi
Power
Turn on/off the air conditioner
Purity
Select Zero filter and Virus doctor
Smart Sensor
Select Smart sensor mode
Temp
+ -
Increase/Decrease the temperature
by 1˚C
Auto Clean
Activate auto clean function to dry inside
of the indoor unit (to get rid of odor)
good'sleep
Set the good'sleep mode on
Mode
Select one of the 5 operation modes
Quiet
Reduced noise is generated during
operation
Fan
Adjust how much air flows through the
air conditioner with the 4 different fan
speeds
Air Flow
Set the air flow to cool effectively
according to the surrounding
Solo/Family
Select Solo/Family mode
Turbo
Operate in maximum fan speed to
cool/warm quickly
Off Timer
Set the Off timer on
Remote controller display
Beep Off
To silence the beep sound when pressing
the button
Set/Cancel
Set/Cancel the timer/good'sleep mode
On Timer
Set the On timer on
[2
nd
F] button
Select the function underneath a button
Lighting
Set lighting of indoor unit
• 2
nd
F button:
When pressing the
2
nd
F
button,
will appear on the remote controller display and you
can select the below function of a button.(e.g. When pressing
Lighting
, you can select the Lighting
function.) If you press the
2
nd
F
,
Power
,
Purity
and the
Set/Cancel
button or don't press any buttons for
10seconds, the display will disappear and you can select the function of the button.
NOTE
칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 17
2014-03-12 오전 9:33:00
