Samsung AF**FSSDA Series Page 39 User & Installation Manual Download

Page: 39 / 54

Indoor/outdoor unit installation diagram

Maximum

allowable piping

elevation 10m

or less

6m or

less

Install S-trap for

every 6m

Maximum allowable

piping length 20m

or less

Outdoor unit

50cm

or more

30c

m o

50cm or

Air guide

(Not provided by

manufacturer )

30cm or more

20cm or more

obs

tacl

or m

ore

60cm

or m

ore

30cm or

Protection

vinyl

Outdoor

unit leg

Rubber leg

Spare space for piping

• One S-trap must be installed on the low pressure

pipe up to 6m of piping elevation. For piping
elevation that exceeds 6m, install S-trap every
6m.

CAUTION

Piping length for indoor/outdoor unit installation

Refer to illustration on the left for maximum allowable
piping length and elevation.

Since product performance and lifespan may decrease as
piping length becomes longer, try to minimize the piping
length but make sure it is over 5m.

Select the installation location where you can keep the
piping bending to maximum 10 spots.

Stated cooling performance is based on product with 5m
piping.

Installation space for floor type indoor unit

To minimize the waste of space due to installation, install the indoor unit as
shown in below figure.

Top view

❋

After completing the installation, remove the protection vinyl.
(Be careful of static electricity).

❋

After completing the installation, remove the protective
filament film on the product.

• Make sure that there are no obstacles (such as curtains etc.) blocking air

inlets of the indoor unit.

• Clear space on the right side of the indoor unit for possible filter

maintenance in the future.

CAUTION

When air guide needs to be installed to prevent the warm discharge air from
disturbing the pedestrian, refer to the illustration on the right side for installation.

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 38

2014-03-12 오전 9:33:10

Summary of Contents for AF**FSSDA Series























































Search results

Summary of Contents for AF**FSSDA Series

Reviews:

Related manuals for AF**FSSDA Series

Brands by name

Popular brands

Samsung AF**FSSDA Series, User & Installation Manual

Search results

Summary of Contents for AF**FSSDA Series

Reviews:

Related manuals for AF**FSSDA Series

Brands by name

Popular brands