18
Installing the unit
Outdoor unit installation
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level and vibration,
particularly if the outdoor unit is to be installed in a location exposed to strong winds or at a height, the unit must be fixed to
an appropriate support(wall or ground).
f
f
Fix the outdoor unit with anchor bolts.
•
The anchor bolt must be 20mm or higher from the base
surface.
NOTE
•
When tightening the anchor bolt, tighten the rubber washer
to prevent the outdoor unit bolt connection part from
corroding.
•
Make a drain outlet around the base for outdoor unit
drainage.
•
If the outdoor unit is installed on the roof, you have to check
the ceiling strength and waterproof the unit.
CAUTION
(Unit : mm)
620
940
328
344
384
Anchor bolt hole
EHS MONO_ODU_IM_05387A-01_BOOK.indb 18
2015-06-25 오후 4:40:20
