Samsung 710T-BLACK User Manual Download

Page: 70 / 102

Overview

Installation

OSD Mode

Color

Calibration

Uninstall

Troubleshooting

Uninstall

The MagicTune™ program can be removed only by using the "Add or Remove Programs" option of the
Windows™ Control Panel.

Perform the following steps remove MagicTune™.

1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on

Windows™ XP, go to [Control Panel] in the [Start] menu.

2. Click the "Add or Remove Programs" icon in Control Panel.

3. In the "Add or Remove Programs" screen, scroll down to find "MagicTune™." Click on it to highlight

it.

4. Click the "Change/Remove" button to remove the program.

5. Click "Yes" to begin the uninstall process.

6. Wait until the "Uninstall Complete" dialog box appears.

Visit the MagicTune™

website

for technical support for MagicTune™, FAQs (questions and answers) and

software upgrades.

Summary of Contents for 710T-BLACK







































































































Search results

Summary of Contents for 710T-BLACK

Reviews:

Related manuals for 710T-BLACK

Brands by name

Popular brands

Samsung 710T-BLACK, User Manual

Search results

Summary of Contents for 710T-BLACK

Reviews:

Related manuals for 710T-BLACK

Brands by name

Popular brands