Samsung 570DX - SyncMaster - 57" LCD Flat Panel Display Service Manual Download Page 21

Page: 21 / 122

3. Alignment and Adjustments

3-19

- Info Grid shows some basic information necessary to

Image Lock.

1) Image Lock

Available only the controls for PC and BNC.

2) Coarse

Adjusts Coarse of the selected display.

3) Fine

Adjusts Fine of the selected display.

4) Position

Adjusts Position of the selected display.

5) Auto Adjustment

Automatically adjusts the screen.

- This feature is available only for the displays whose

power status is ON.

-Setting Control - Image Lock

1. Click Settings of the main icons and select the Image tab to display the Setting Control window.

- Info Grid shows some basic information necessary to

Maintenance Control.

1) Lamp control

Adjusts the brightness of the lamp.

2) Auto Lamp Control

Automatically adjusts the backlight of the selected display

at a specified time. The Auto Lamp Control automatically

turns off if you adjust using the Manual Lamp Control.

3) Manual Lamp Control

Allows you to adjust the backlight of the selected display

regardless of the time.

The Manual Lamp Control automatically turns off if you

adjust using the Manual Lamp Control.

- The Maintenance Control feature is available only for the

displays whose Power Status is ON.

-Maintenance Control - Lamp Control

1. Click Maintenance of the main icons and select the Lamp Control tab to display the Maintenance Control

window.

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display



























































































































Search results

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display

Reviews:

Related manuals for 570DX - SyncMaster - 57" LCD Flat Panel Display

Brands by name

Popular brands

Samsung 570DX - SyncMaster - 57" LCD Flat Panel Display, Service Manual

Search results

Summary of Contents for 570DX - SyncMaster - 57" LCD Flat Panel Display

Reviews:

Related manuals for 570DX - SyncMaster - 57" LCD Flat Panel Display

Brands by name

Popular brands